Pro-spec Easy Clutch for BMW F900XR - EC Pro Plus - EC235

For TVS Apache RR 310 and Compatible BMW Models

The Pro-Spec Easy Clutch Pro Plus (EC Pro Plus - EC235) is engineered to significantly reduce clutch lever effort by up to 40%, enhancing comfort and control during everyday commuting and traffic-heavy conditions. Specifically designed for TVS Apache RR 310 and select BMW G/F Series motorcycles, this clutch assist system ensures smoother gear shifting and reduced hand fatigue.

The Easy Clutch Pro Plus is made using aerospace-grade aluminum and combines strength, durability, and lightweight performance. The unit is finely tuned for Indian road conditions while adhering to international quality standards.

Key Features

Up to 40% reduction in clutch lever effort.
Aerospace-grade aluminum housing for high durability and corrosion resistance.
Custom-tuned for Indian riding conditions.
Smooth gear shifts and improved ride comfort in urban traffic.
Plug-and-play design compatible with factory-fit clutch systems.

Included in the Box

Sl.	Component Description	Part Number	Qty
1	Aluminum Housing with Cover	PS EC 200-1	1 No
SS Allen Cap Screws (3x8)	PS SSACS 0308	3 Nos
Hardened Pin, Teflon Washer, Long Fulcrum, Bearing	PS EC BO 200-1/3/4/6	1 Set
Spring Washer (3 mm)	PS SS SW 03	3 Nos
2A/B	Easy Clutch Long Cable V5	PS CLC V5	1 Set
3	Dust Boot for Lever End	PS DB 01	1 No
4	2.5 mm Allen Key	PS HTAK 2.5	1 No
5	Cable Ties	PS EC 200-7	2 Nos
6	Clutch Plug Adjuster	PS EC 200-2	1 No

Installation Guide

Note: Ensure all components are clean and properly lubricated before installation. Use WD-40 or an equivalent cable lubricant on the OEM clutch cable for optimal performance.

Step 1: Remove OEM Clutch Cable

Detach the clutch cable from the clutch lever (refer to Figure A ).
Loosen the lock nuts at the engine yoke and remove the cable head (refer to Figure B ).

Step 2: Install Easy Clutch Pro Plus

Insert the 2B cable into the engine end, reversing the removal procedure.
Route the cable smoothly, avoiding sharp bends or obstructions.
Connect the 2A cable head to the clutch lever, reversing Step 1.

Step 3: Adjust Clutch Release Point

Set the release point to approximately 50% of clutch lever travel.

Adjustment Instructions:

If the release point is below 40%, thread out the adjusters on either side of the clutch housing ( Figure C ).
If the release point is above 60%, thread in the adjusters ( Figure E ).
Fine-tune the engine-side cable adjuster as shown in Figures D and F :
- (a) – Brings the release point closer to the grip.
- (b) – Moves the release point away from the grip.

Important Disclaimer

To ensure optimal clutch performance and avoid premature wear:

Excessive free play may cause the clutch not to disengage fully, resulting in hard gear shifts or difficulty in selecting neutral.
Insufficient free play may lead to the clutch not engaging fully, causing clutch slippage and reduced longevity.

Always verify proper clutch lever free play after installation and make necessary adjustments.

Motorcycle Compatibility

S. No.	Brand	Model
1	TVS	Apache RR 310
2	BMW	G 310 RR
3	BMW	G 310 R
4	BMW	G 310 GS
5	BMW	F 850 GS
6	BMW	F 750 GS
7	BMW	F 900 XR
8	BMW	F 900 R

Sort by:

98 products

Filter and sort

Filter

ZANA Z pro GPS Mount For BMW F 900 XR-ZP-061

ZANA Z pro GPS Mount For BMW F 900 XR-ZP-061

Pro-spec Easy Clutch for BMW F900XR - EC Pro Plus - EC235

Pro-spec Easy Clutch for BMW F900XR - EC Pro Plus - EC235

Collection: BMW F900XR

Quick Links

Support

Get in Touch

Find Us