Easy Cruise for YAMAHA FZ 25 – Prospec – ECZ 020
₹2,250.00 – ₹2,800.00
Easy Cruise for YAMAHA FZ 25 – Prospec – ECZ 020
This is a simple mechanical friction throttle control device and is a direct replacement for original equipment weights. The devices are carefully designed to not create any large weight difference between the OE bar end weights and the Easy Cruz device. It can be used as cruise mode by turning the knob anti-clockwise or as city mode by turning the knob
Thank you for choosing the Pro-Spec Easy Cruz for your ride. This Easy Cruz is designed for the Jawa bikes.
It will be a direct replacement of the existing bar end. Once the Easy Cruz is engaged, it holds the
accelerator in the desired throttle position. When the rider wishes to slow down, the accelerator can be
brought back to its initial position by turning the accelerator in the direction of deceleration with the Easy
Cruz is engaged.
Please follow the instructions carefully to ensure the desired benefit of the Easy Cruz.
1. Loosen the Allen head screw and remove the bar end from the Handle Bar.
2. Place the Easy Cruz in place of the OE bar end as shown in the figure below.
SI. | DESCRIPTION | QTY. |
1 | 06×70 Stainless Steel Allen Cap Screw (PS SSACS 0670) | 1 |
2 | Easy Cruz Body (PS ECZ 020) | 1 |
3 | Easy Cruz Knob (PS ECK 01) | 1 |
The Easy Cruz is developed considering safe usability but it is the complete responsibility of the rider to be
aware of the operation and purpose for which it is intended.
Please note that the grub screw shown in the picture should not be over tightened. Otherwise, it will lead to
damage to the thread.
Note: Though the Easy Cruz retrofits are designed for DIY installation it is recommended you have them installed by
a technician if you face difficulty
Related products
RE Interceptor 650 / GT 650
Prospec Easy Cruz (Throttle Controller) for Interceptor 650- ECZ008-B – ECZ008L-B
Cruise Control
Cruise Control