RYNOX H2GO Pro Waterproof Socks

• Dry core Waterproof Technology: A 100% waterproof hydrophobic polyurethane (PU) membrane sandwiched between the inner and the outer layers keeps water out. It is rated for water resistance of >5,000mm (Hydrostatic Head Test).
• Breathable Construction: The same Dry core waterproof membrane that keeps water out assists in sweat and condensation management. The specialized construction of the waterproof membrane passively allows water vapor to diffuse through but prevents water ingress; keeping you dry and cool simultaneously.
• MODULAR Performance Layering System: The H2Go socks are a modular, independent waterproof layer for your feet. Unlike the integrated waterproof membrane in waterproof boots, you now have true freedom to choose when and how to add a waterproof layer.

• Made for Motorcycling: The length/height of the H2Go socks is designed specifically to be worn with even the tallest protective motorcycle boots, and keep your shin and calf free from chafing against the boot entry.
• Tough Outer Layer: Made from a specialized blend of nylon, polyester, and Spandex, the outer shell is designed to resist wear and increase the service life of the socks.
• Coolmax Inner Layer:  Made from a specialized blend of Coolmax, polyester, and Spandex, the inner layer is designed for maximum comfort and blister-free use. Coolmax is highly moisture-wicking and breathable and helps you beat the heat.

• Compression Fit: Ergonomically molded knit with 4-way stretch ensures the socks stay in place on your feet while providing an active fit.

• Length/Height of the Socks: 40 cm (top of the entry to the corner of heel)
• Length/Height of Dry core Waterproof Membrane: 30 cm
• Waterproofing Intact: Wading in water less than 30 cm deep
• Water Ingress Imminent: Wading in water more than 30 cm deep
• Riding in the Rain: Always wear waterproof rain pants to avoid water trickling down inside the socks

• When the H2Go Waterproof Socks are worn in a humid climate, the user might experience a degree of sweat condensation inside the socks. This is natural and does not affect the waterproof performance of the socks.
• Due to the structural nature of the outer fabric used, some degree of pilling or bobbling may be observed. The formation of fuzzy balls or loose fibers on the surface of the outer fabric of socks occurs due to wear & tear or when comes in contact with Velcro on the boots. This is normal and does not reduce or adversely affect the performance of the socks or waterproof membrane. Pilling can be minimized by ensuring that materials like the rough side of the Velcro on the boots do not come in contact with the outer fabric of the socks.
• Product name: RYNOX H2GO WATERPROOF SOCKS
• Name of the commodity: Motorsport Apparel
• Manufactured/Imported By: Rynox Gears, Prithvi Complex, Building No. B3, Gala No. 104-110, 1st Floor, Kalher, Bhiwandi, Thane, Maharashtra, India 421302
• Country of Origin: China
•  Price, wherever mentioned, is MRP and inclusive of all taxes and legal Metrological Compliances.

Step 1 – Prep

• Shake off any surface dirt
• Flip inside out

Step 2 – Which Detergent?

• Use (in order of preference)
• Purpose-made tech-wash
• Neutral unscented liquid detergent
• Woolen liquid detergent
• Baby shampoo
• Completely Avoid
• Any type of granular powder detergent
• Any type of heavily scented liquid detergent

Step 3 – Soak

• Dissolve 1 cap of detergent, in a bucket of lukewarm water.
• Soak for at least 30 minutes
• Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it’s too hot for your gear.
• While soaking, make sure to fill the inside of the socks with the detergent water, and then leave the socks to soak for 30 minutes

Step 4 – Wash and Rinse

• Keep the socks flipped inside out
• Agitate and scrub gently with your hands
• Repeat until clean
• Rinse multiple times until free of detergent
• Avoid using brushes
• Flip the socks the right side out and repeat the wash and rinse process

Step 5 – Let Dry and Store

• Flip the socks inside out. Hang dry in a cool ventilated shaded area.
• Once the inside is dry, flip the socks on the right side out. Hang dry in a cool ventilated shaded area.
• Once completely dry, store in a cool, ventilated moisture-free place, away from house dust
• Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.