Barkbusters Hardware Kit – Two Point Mount-BHG-112-00-NP

Barkbusters Hardware Kit – Two Point Mount-BHG-112-00-NP

SPECIFICATIONS:-

• Designed specifically for the HONDA CT125 (’20 on), HONDA MSX125 GROM (’14-’20), KAWASAKI Z125 PRO (’16 on) & SUZUKI DS250SX V-STROM (’23 on) with OEM (Original Equipment Manufacturer).
• Two mounting points secure the full wrap-around aluminum design.
• The heat-treated aluminum backbone for added strength and impact protection (backbone powder-coated BLACK).
• Bar End Weights included.
• Easy installation.
• Hardware Kit only (NO plastic guards).
• Compatible with JET VPS, ORM or C, RBON guards (each sold separately).

To fit:

HONDA CT125 (’20 on)
HONDA MSX125 GROM (’14-’20)
KAWASAKI Z125 PRO (’16 on)
SUZUKI DS 250SX V-STROM (’23 on)

Fitting Procedure shoes shown on the RIGHT side:-

Loosely assemble clamp (4) to the handlebar with applicable parts. FITTING TIP: The clamp is positioned at the handlebar bend. • Loosely attach the handguard backbone with applicable parts to the handlebar end and the clamp. • Note: The preferred backbone position is horizontal when viewed from the side. • Tighten all bolts in the following order (9), then (7), then (5 and 6). • Use recommended torque specifications over the page.

The fitting Procedure is shown for the LEFT side:-

• Loosely assemble clamp (3) below the bend of the handlebar and position it as
the own in the image below.
• Loosely attach the handguard backbone with applicable parts to the handlebar
end and the clamp.
• Note: The preferred backbone position is horizontal when viewed from the side.
• Tighten all bolts in the following order (8), then (7), then (5 and 6).
• Use recommended torque specifications over the page.

Disclaimer:

A failure to follow these fitting instructions could cause serious injury, death, or property damage. These handguards are intended solely for use with motorcyclesATVsV/snowmobiles/scooters that have not been modified. They are not designed to prevent injury or death while riding or in an accident or crash. The user must ensure that all controls are free of the handguards every time that they ride. By installing and/or using this product you acknowledge that you accept these terms and have followed the fitting instructions.

WARNING: Check the operation of all handlebar controls, specifically the throttle, front brake, kill switch, and clutch to ensure they are operating correctly and are by the OEM specifications. Do not ride the motorcycle if any controls are not operating correctly or if rear view mirror vision is obscured. Check periodically that all bolts are tight.

CAUTION:

Installation of the handguard is safety-relevant work and can be complicated. We recommend the installation be performed by a motorcycle service technician. Rideworx accepts no liability for damages caused by improper mounting. All screws, bolts, and nuts, including all replacement hardware provided by Rideworx, should be tightened to the torque specified in the table. After the first 50km of riding check all screws, bbolboltsnd nuts are tightened to the correct torque. We recommend a medium-strength liquid thread lock product on all fasteners.

Installation Instructions:-

Brand

Shipping is usually done in 2 working days after receiving order. If need express shipping contact our team at 8962258899. If you are making backorder or product is in pre-order state then it will be shipped when we get new stocks.

Once order is shipped and not received when delivery attempt is made, it will come back to us. In such case of RTO (Return to Origin), shipping cost of return and reshipping is to be born by Customer. Once order is shipped tracking details are shared on email and also can be checked in your website account. In any case of delay in delivery due to shipping service provider, we will not be liable. You need to contact shipping service provider.
Some Products are made on order, so may take time of 7-10 days.