Pro-spec Easy Clutch for Ducati Scrambler Desert Sled-EC Pro-EC 265
₹3,200.00
Or 3 interest free payments of ₹1,066.68 with

Pro-spec Easy Clutch for Ducati Scrambler Desert Sled-EC Pro-EC 265
For Ducati Scrambler 800, Multistrada 950, and Scrambler Desert Sled
The Pro-Spec Easy Clutch Pro – EC 265 is a high-performance enhancement engineered to reduce clutch lever effort by up to 40%, significantly improving rider comfort during city commutes and stop-and-go traffic. Precision-built from aerospace-grade aluminum, the Easy Clutch Pro is tailored for Indian riding conditions and conforms to global durability and performance standards.
This model is designed to seamlessly extend your OE clutch cable without requiring any permanent modifications to your motorcycle.
Key Features
- Reduces clutch effort by up to 40%
- Constructed from aerospace-grade aluminum
- Integrates with OE cable – no cutting or welding required
- Custom-tuned for Indian road conditions
- Reduces fatigue in traffic and improves shifting comfort
- Tested to meet global performance standards
What’s Included
Sl. | Description | Part Number | Quantity |
---|---|---|---|
1 | Aluminum Housing (B03) | PS EC 200-1 | 1 No |
SS Allen Cap Screws (3 mm x 8 mm) & Spring Washers | PS SSACS 0308 / PS SS SW 03 | 3 Nos | |
Fulcrum Set (Hardened Pin, Teflon Washer, Bearing) | PS EC 200-2/3/4/6 | 1 Set | |
2 | Easy Clutch Short Cable | PS AFG-CLC-00219 | 1 No |
3 | Dust Boot | PS EC BO 01 | 1 No |
4 | Cable Tie | PS EC 200-7 | 1 No |
5 | Cable Adjuster | PS EC BO 200-8 | 1 No |
6 | 2.5 mm Allen Key | PS HTAK 2.5 | 1 No |
Installation Guide
Follow the steps below for optimal performance and safety:
Step 1: Disconnect OE Cable
- Detach the OE clutch cable head from the clutch lever (Fig. A).
- Loosen the lock nut (2) at the engine yoke to release the cable, if required (Fig. B).
Step 2: Assemble Easy Clutch
- Open the aluminum housing by removing all Allen screws (Sl. No. 1).
- Remove the fulcrum from the housing.
- Insert the OE clutch cable into the adjuster, then fit the cable head into the fulcrum (Fig. C
- Thread the Pro-Spec short cable into the left side of the housing and secure its head into the fulcrum .
- Connect the opposite end of the Pro-Spec cable to the clutch lever and slide the dust boot over the joint.
Clutch Lever Adjustment
To ensure smooth gear shifts and prevent clutch wear, set the clutch release point at approximately 50% of the lever’s range of motion.
Adjustment Guidelines
- If the release point is below 40%, thread out the adjuster on either side of the Easy Clutch Fig.. g. D the release point is above 60%, thread in the adjuster to bring it closer (Fig. E).
- For additional fine-tuning, adjust the cable at the engine-side yoke :
- Position “a” Brings the release point closer to the handlebar (Fig. F).
- Position “b” Moves the release point further away from the handlebar (Fig. G
Maintenance & Safety Notes
- Ensure the clutch lever has proper free play :
- Too much free play = clutch won’t disengage properly → gear shifting issues.
- Too little free play = clutch may slip → reduced performance and premature wear.
- Lubricate the OE cable thoroughly using WD-40 or a compatible cable lubricant before installation.
Compatibility
This Easy Clutch Pro – EC 265 is specifically designed for the following Ducati motorcycles:
- Scrambler 800
- Scrambler Desert Sled
- Multistrada 950
Disclaimer
Improper installation or incorrect adjustment may lead to clutch malfunction, gear engagement issues, or premature wear. Always follow the instructions precisely and check clutch operation before riding. Pro-Spec Performance Parts is not liable for damage resulting from incorrect usage or installation.
Only logged in customers who have purchased this product may leave a review.
Once order is shipped and not received when delivery attempt is made, it will come back to us. In such case of RTO (Return to Origin), shipping cost of return and reshipping is to be born by Customer. Once order is shipped tracking details are shared on email and also can be checked in your website account. In any case of delay in delivery due to shipping service provider, we will not be liable. You need to contact shipping service provider.
Some Products are made on order, so may take time of 7-10 days.
Related Products
Easy Ride windscreen
Pro-spec Easy Ride Windshield Extender Clip-on for Ducati Multistrada 1250- ER760
Easy Ride windscreen
Pro-spec Easy Ride Windshield Extender Clip-on for Ducati Multistrada 950- ER760
Reviews
There are no reviews yet.