DENALI Plug-n-Play CANsmart Controller for BMW R1200 LC & R1250 Series – Gen II - DNL.WHS.11602

Name: DENALI Plug-n-Play CANsmart Controller for BMW R1200 LC & R1250 Series – Gen II - DNL.WHS.11602
Brand: Denali
SKU: GF002410
Price: 33900.00 INR
Availability: InStock

Denali

Rs. 33,900.00

Sale Sold out

Shipping calculated at checkout.

SKU:GF002410

With Bill
Fast Shipping
Safe Packing

DENALI Plug-n-Play CANsmart Controller for BMW R1200 LC & R1250 Series – Gen II - DNL.WHS.11602

The DENALI CANsmart™ Controller Gen II harnesses the flexibility and intelligence of your BMW motorcycle’s CANbus electrical system to make accessory installation drastically easier. It provides plug-and-play installation of up to four electrical accessories, all controlled through your BMW’s existing handlebar switches, including the rotary WonderWheel multi controller. The CANsmart also manages power distribution, eliminating the need for bulky relays to control your accessories.

The four circuits are pre-programmed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and a B6 auxiliary brake light. Unlike the Gen I CANsmart, all four Gen II circuits can provide up to 10 amps of continuous power and each circuit can be configured for different accessory types. The maximum total power draw remains 30 amps continuous.

The Gen II also adds advanced auxiliary lighting functions, including light modulation and independent left/right turn-signal cancellation for improved visibility and control.

Features

High/Low Sync: Set auxiliary lights to switch between programmable high and low intensity using the factory high beam switch.
ON/OFF and Dim: Independently control two sets of lights and adjust their intensity using the original vehicle switches.
Modulate Lights: Set auxiliary lights to modulate for increased visibility to other motorists.
Flash to Pass: Pulse the high beam switch three times to quickly strobe the auxiliary lights three times.
Cancel With Turn Signal: Automatically cancel the corresponding auxiliary light when the turn signal is activated.
Inverse Flashing With Hazards: Flash auxiliary lights inversely with the hazard lights to increase visibility during roadside emergencies.
Plug & Play Horn Installation: Easily connect high-power aftermarket horns such as the SoundBomb™ without an additional harness or relay.
Strobe with Horn: Automatically strobe auxiliary lights when the horn is activated.
Deceleration Activated Smart Brake: Uses real-time vehicle speed information to activate the auxiliary brake light during deceleration before the brake is applied.
Flash Pattern Braking: Choose from four programmable brake light flash patterns to improve rear visibility.
Circuit Function Selector: Configure any of the four circuits for the accessory function of your choice through the CANsmart software.
Switched Power Source: Provides clean switched 12V power for accessories that turn on and off with the ignition.
Delay Time Out: Keep accessories powered for up to 30 seconds after switching off the motorcycle.
On Board Power: Use the accessory circuit to power devices such as GPS units, phones, heated gear, or other electronic accessories.

Vehicle Fitment

BMW R 1200 GS LC 2013-2018
BMW R 1200 GS LC Adventure 2014-2018
BMW R 1200 RS 2015-2018
BMW R 1200 R 2015-2018
BMW R 1200 RT 2014-2018
BMW R 1250 GS 2019-2023
BMW R 1250 GS Adventure 2019-2023
BMW R 1250 RT 2019-2023
BMW R 1250 RS 2020-2022
BMW R 1250 R 2020-2022

Product Highlights

Integrates seamlessly with the BMW CANbus system
Plug-and-play installation
Controls up to 4 electrical accessories
Four circuits with up to 10 amps continuous power per circuit
30 amps maximum continuous total power
Includes dedicated wiring for DENALI lights, SoundBomb horn, and auxiliary brake light