DENALI T3 Switchback LED Pods - Rear - Indicator/Brake - M8 Mount - DNL.T3.10100

DENALI T3 Switchback LED Pods - Rear - Indicator/Brake - M8 Mount - DNL.T3.10100

The DENALI T3 Switchback LED Pods combine bright red running and brake lighting with a high-intensity amber turn signal in one compact housing. Designed to replace factory rear turn signals, the T3 rear pods provide enhanced visibility while maintaining a sleek, low-profile appearance. Separate rows of high-power single-color LEDs deliver impressive brightness and reliable switchback performance.

Features

• Switchback functionality with red run/brake light and amber turn signal.
• Dual-circuit brake light with 50% low and 100% high output.
• 180-degree viewing angle for improved visibility.
• Six high-power LEDs per pod.
• Low-profile design.
• Easy connection to the vehicle brake and turn signal circuits.
• E-Mark approved run/brake and turn signal.
• M8 stud mount designed to replace factory turn signals.
• Bright amber turn signal output in a compact housing.
• IP67 waterproof construction.

Installation Notes

Turn load resistors are necessary to prevent hyper-flashing when replacing incandescent turn signals with LED turn signals. Use DNL.WHS.12700 when replacing original 10-watt signals and DNL.WHS.12800 when replacing original 21-watt signals.

BMW Compatibility Note

DENALI T3 Rear Pods are not currently compatible with BMW R1250GS/A or R1300GS/A motorcycles unless used with the DENALI CANsmart.

When powering rear T3 pods through a CANsmart, the red running light will remain illuminated between amber turn signal flashes. This is an unavoidable result when powering T3s solely from a CANsmart. If you prefer the red running light to switch off while the amber signal is active, connect the red running light wires from the T3 pods directly to a switched power source on the vehicle and set the CANsmart brake light circuit to brake only.

Product Specifications

Total Power Draw: 0.02A Run, 0.21A Brake, 0.52A Turn Signal

Input Voltage: 12V DC

Size: 2.9" x 1.13" x 0.5"

Weight: 0.08 lbs

Raw Lumens: 870

Waterproof Rating: IP67

Mount Type: M8 Stud Mount

SKU: DNL.T3.10100

UPC: 810005872645

Product Type: Turn Signals

What's In The Box?

• Rear M8 Turn Signals x 2
• Wiring Pigtails with Waterproof Connectors x 2
• Mounting Nuts x 2
• Posi-Taps x 4
• Posi-Locks x 4
• Illustrated Installation Instructions

Instruction Manual

PDF Instruction Manual (English)

Fitment

This is a Universal Fit Item designed to fit many vehicles. Universal products may require a vehicle-specific fit kit, sold separately, or other modifications for installation. Universal products are not guaranteed to fit every vehicle. Check the product description for installation requirements.