Pro-Spec Easy Clutch Pro for BMW G 310 GS– EC 230

Pro-Spec Easy Clutch Pro for BMW G 310 GS– EC 230

The Pro-Spec Easy Clutch Pro (Model: EC 230) is a mechanical clutch assist system designed specifically for the BMW G 310 GS and BMW G 310 R. It can reduce clutch lever effort by up to 40%, helping improve comfort and reduce hand fatigue during daily commuting, stop-and-go traffic and frequent gear changes.

Constructed from aerospace-grade aluminum and tuned for Indian riding conditions, the Easy Clutch Pro combines durability, lightweight construction and reliable mechanical operation. The system works as an extension to the OEM clutch cable and provides mechanical assistance without requiring permanent modifications to the motorcycle.

Features

• Clutch Effort Reduction: Helps reduce clutch lever effort by up to 40%.
• Aerospace-Grade Aluminum: Durable and lightweight housing construction.
• Indian Road Tuned: Designed and tuned for riding conditions in India.
• Mechanical Assist System: Works as an extension to the OEM clutch cable to make clutch operation easier.
• Direct-Fit Design: Designed for BMW G 310 GS and G 310 R without permanent modifications.
• Improved Riding Comfort: Helps reduce hand fatigue during urban commuting and frequent clutch operation.
• International Quality: Designed to conform to global mechanical standards.

Product Specifications

Product: Pro-Spec Easy Clutch Pro

Model: EC 230

Type: Mechanical Clutch Assist

Clutch Effort Reduction: Up to 40%

Material: Aerospace-Grade Aluminum

Application: BMW G 310 GS and BMW G 310 R

Installation: Direct-Fit, No Permanent Modifications Required

Bike Compatibility

• BMW G 310 GS
• BMW G 310 R

Package Includes

• Aluminum Housing with Internal Mechanism – Part No. PS EC 200-1 – Qty: 1
• 3 x 8 mm Stainless Steel Allen Cap Screws with Washers – Part No. PS SSACS 0308 / PS SS SW 03 – Qty: 3
• Fulcrum, Hardened Pin, Teflon Washer and Bearing – Part No. PS EC 200-2/3/4/6 – Qty: 1 Set
• Easy Clutch Short Cable – Part No. PS AFG-CLC-00219 – Qty: 1
• Dust Boot – Part No. PS EC BO 01 – Qty: 1
• Cable Tie – Part No. PS EC 200-7 – Qty: 1
• Cable Adjuster – Part No. PS EC BO 200-8 – Qty: 1
• 2.5 mm Allen Key – Part No. PS HTAK 2.5 – Qty: 1

Installation Instructions

Follow the installation procedure carefully to ensure correct clutch operation and safe riding. Professional installation is recommended if you are unsure about cable routing or clutch adjustment.

• Detach OEM Cable: Disconnect the clutch cable from the clutch lever. Loosen the cable at the engine yoke using the lock nut to release cable tension.
• Prepare Easy Clutch Housing: Unscrew the housing to access the internal components and remove the fulcrum assembly.
• Connect OEM Cable: Insert the OEM cable into the right-side adjuster and securely seat the cable head into the fulcrum.
• Connect Pro-Spec Short Cable: Thread the short cable into the left side of the housing and insert its cable head into the fulcrum.
• Connect to Clutch Lever: Connect the other end of the short cable to the clutch lever and secure the dust boot.
• Reassemble Housing: Reassemble the housing using the supplied screws and washers.
• Adjust Release Point: Set the clutch release point to approximately 50% of clutch lever travel using the adjusters on either side of the housing.

Clutch Adjustment Guidelines

• If the clutch release point is below 40%, thread the adjuster outward.
• If the clutch release point is beyond 60%, thread the adjuster inward.
• For additional fine-tuning, use the OEM cable adjuster at the engine end.
• Adjusting in the specified direction can move the release point closer to or further away from the grip.

Important Information

• Ensure there is appropriate clutch lever free play for proper clutch disengagement and engagement.
• Excessive free play may prevent the clutch from fully disengaging, making gear shifts and neutral selection difficult.
• Insufficient free play may cause clutch slip, reduced performance and premature clutch wear.
• Lubricate the OEM clutch cable using WD-40 or a recommended cable lubricant to help maintain smooth operation.
• Always test clutch operation thoroughly after installation and adjustment before riding.

Correct installation and clutch adjustment are essential for safe operation and optimal performance. If you are unsure about the installation or adjustment procedure, seek professional assistance.