Liqui Moly Special Tec T3210 0W-20 Engine Oil – 1 L – 48341

Liqui Moly Special Tec T3210 0W-20 Engine Oil – 1 L – 48341

Liqui Moly Special Tec T3210 0W-20 is an advanced full synthetic, low-friction engine oil designed to provide reliable lubrication, minimise engine wear and help keep the engine clean. It supports excellent engine performance with low fuel consumption and is ideally suited for engines equipped with start-stop systems. Developed for year-round use in gasoline and hybrid vehicles, it is designed specifically to meet the requirements of Asian and American vehicles.

Features

• Advanced full synthetic, low-friction motor oil.
• Helps maintain outstanding engine cleanliness.
• Provides high lubrication reliability.
• Designed to support low fuel consumption and reduced pollutant emissions.
• Suitable for engines with start-stop systems.
• Tested for turbochargers and catalytic converters.
• Excellent wear resistance.
• Good ageing stability.
• Designed for year-round use in gasoline and hybrid vehicles.
• Formulated to meet the requirements of Asian and American vehicles.

Product Specifications

Product: Special Tec T3210 Engine Oil

Brand: LIQUI MOLY

Part Number: 48341

Viscosity Grade: SAE 0W-20

Oil Base: Advanced Full Synthetic

Oil Type: Low-Friction Motor Oil

Pack Size: 1 L

Packaging: Plastic Canister

Suitable Vehicles: Gasoline and Hybrid Vehicles

Approvals: API SP, ILSAC GF-6A

Additional Recommendations: API SN, API SN PLUS

Technical Data

SAE Class: 0W-20 (SAE J300)

Density at 15°C: 0.845 g/cm³ (ASTM D4052)

Viscosity at 40°C: 43.4 mm²/s (ASTM D445)

Viscosity at 100°C: 8.2 mm²/s (ASTM D445)

MRV Viscosity at -40°C: ≤ 60,000 mPa·s (ASTM D4684)

CCS Viscosity at -35°C: ≤ 6,600 mPa·s (ASTM D5293)

Viscosity Index: 165 (ASTM D2270)

HTHS Viscosity at 150°C: ≥ 2.6 mPa·s (ASTM D5481)

Pour Point: -42°C (ASTM D97)

Noack Evaporation Loss: 11.5% (ASTM D5800)

Flash Point: 220°C (ASTM D92)

Total Base Number (TBN): 7.2 mg KOH/g (ASTM D2896)

Sulfate Ash: 0.79 g/100 g (ASTM D874, as supplied)

Colour Number: 2.0 (ASTM D1500)

Specifications and Approvals

• API SP
• ILSAC GF-6A

LIQUI MOLY recommends this product for vehicles or assemblies requiring API SN or API SN PLUS specifications. Always check the vehicle manufacturer's requirements before use.

Areas of Application

Suitable for year-round use in gasoline and hybrid vehicles. The formulation is designed specifically to meet the requirements of Asian and American vehicles, subject to the engine manufacturer's specified oil requirements.

Application Instructions

Follow the specifications and instructions provided by the vehicle or engine manufacturer. LIQUI MOLY states that optimum performance is guaranteed only when the oil is used unmixed. Before use, confirm that SAE 0W-20 and the listed API/ILSAC specifications are suitable for your vehicle.

Available Pack Sizes

• 1 L Plastic Canister – 48341
• 3.5 L Plastic Canister – 48356
• 4 L Plastic Canister – 48342
• 60 L Black Plate Barrel – 48389
• 205 L Black Plate Barrel – 48330

Important Information

Technical information is based on the manufacturer's research and is considered reliable, although it is not legally binding. Always consult your vehicle's owner's manual to confirm the correct oil viscosity and specifications before purchasing or use.