Liqui Moly Special Tec T3600 5W-30 Engine Oil – 3.5 L – 48355

Liqui Moly Special Tec T3600 5W-30 Engine Oil – 3.5 L – 48355

LIQUI MOLY Special Tec T3600 5W-30 is a high-performance, low-SAPS, low-friction engine oil featuring modern wear-protection technology. It helps prevent sludge formation, maintains a stable lubricating film under demanding operating conditions and supports low oil consumption and moderate fuel consumption. Suitable for gasoline, diesel and hybrid vehicles, it is designed for engines with or without turbocharging and for applications requiring the specified lubricant approvals.

Features

• High-performance, low-SAPS, low-friction motor oil.
• Modern wear-protection technology for reliable engine lubrication.
• Helps prevent black sludge and maintain engine cleanliness.
• Provides good ageing stability and high wear resistance.
• Offers good cold-start performance.
• Suitable for gasoline and diesel engines with or without exhaust-gas turbocharging.
• Low evaporation loss.
• High shear stability for a stable lubricating film.
• Supports moderate fuel consumption.
• Provides good cleaning action.
• Tested for turbochargers and catalytic converters.
• Suitable for engines equipped with particulate filters, where the required specification is met.

Product Specifications

Product: Special Tec T3600 Engine Oil

Brand: LIQUI MOLY

Part Number: 48355

Viscosity Grade: SAE 5W-30

Oil Type: High-Performance Low-SAPS, Low-Friction Motor Oil

Pack Size: 3.5 L

Packaging: Plastic Canister

Suitable Engines: Gasoline and Diesel Engines

Suitable Vehicles: Gasoline, Diesel and Hybrid Vehicles

Turbocharging: Suitable for engines with or without turbocharging, subject to manufacturer specifications

Exhaust After-Treatment: Suitable for particulate-filter applications requiring this specification

Approvals: ACEA C2, ACEA C3, API SP

Technical Data

SAE Class: 5W-30 (SAE J300)

Density at 15°C: 0.855 g/cm³ (ASTM D4052)

Viscosity at 40°C: 71.0 mm²/s (ASTM D445)

Viscosity at 100°C: 12.0 mm²/s (ASTM D445)

MRV Viscosity at -35°C: ≤ 60,000 mPa·s (ASTM D4684)

CCS Viscosity at -30°C: ≤ 6,600 mPa·s (ASTM D5293)

Viscosity Index: 165 (ASTM D2270)

HTHS Viscosity at 150°C: ≥ 3.5 mPa·s (ASTM D5481)

Pour Point: -39°C (ASTM D97)

Noack Evaporation Loss: 10.0% (ASTM D5800)

Flash Point: 230°C (ASTM D92)

Total Base Number (TBN): 7.0 mg KOH/g (ASTM D2896)

Sulfate Ash: 0.8 g/100 g (ASTM D874)

Colour Number: L3.0 (ASTM D1500)

Specifications and Approvals

• ACEA C2
• ACEA C3
• API SP

Areas of Application

Designed for year-round use in gasoline, diesel and hybrid vehicles, including engines with or without turbocharging and vehicles equipped with particulate filters. Use only where the vehicle or engine manufacturer requires a lubricant meeting the applicable specifications. The oil has also been tested on engines with catalytic converters.

Application Instructions

Always follow the specifications and instructions provided by the vehicle or engine manufacturer. Before use, verify that SAE 5W-30 and the ACEA/API specifications listed for this oil meet your vehicle's requirements.

Available Pack Sizes

• 1 L Plastic Canister – 48351
• 3.5 L Plastic Canister – 48355
• 4 L Plastic Canister – 48352
• 60 L Black Plate Barrel – 48392
• 205 L Black Plate Barrel – 48350

Important Information

Technical information is based on the manufacturer's research and is considered reliable, although it is not legally binding. Always consult your vehicle's owner's manual to confirm the correct oil specification and compatibility before purchasing or use.