Pro-Spec Easy Tag Base Mount - ET 41619
Pro-Spec Easy Tag Base Mount - ET 41619
Pro-Spec
SKU:GF004117
Couldn't load pickup availability
- With Bill
- Fast Shipping
- Safe Packing
Pro-Spec Easy Tag Base Mount – ET 41619
The Pro-Spec Easy Tag Base Mount – ET 41619 is a multi-utility accessory crafted to enhance your riding experience by providing added protection to your motorcycle’s existing tank and engine guards.
Manufactured from glass-filled fibre blended with Delrin, the mount offers exceptional abrasion resistance and impact absorption. When installed correctly, it helps prevent direct metal-to-tarmac contact —a known fire hazard during crashes or falls. Additionally, the mount includes bolt-on provisions for attaching compatible accessories, enhancing its practical value.
Key Benefits
- High Durability: Resistant to abrasion and impacts
- Fire Safety: Reduces fire risk by preventing metal-ground contact
- Expandable Utility: Supports bolt-on accessories
- DIY Friendly: Simple to install with basic tools
- Optimized Fit: Designed for guard pipe sizes from 16 mm to 19 mm
Package Contents
| Sl. No | Item | Qty |
|---|---|---|
| 1 | Base Mount Body | 1 |
| 2 | 4x30 mm Allen Cap Screws | 4 |
| 3 | Rubber Sleeves | 7 |
| – ET 416 (16 mm) | 2 | |
| – ET 422 (22 mm) | 2 | |
| – ET 425 (25 mm) | 2 | |
| – ET 419 (19 mm) | 1 |
Sleeve Compatibility Chart
| Guard Diameter | Required Sleeves |
|---|---|
| 16 mm | 2 sleeves of 16 mm |
| 19 mm | 1 sleeve of 16 mm + 1 sleeve of 22 mm |
| 22 mm | 2 sleeves of 22 mm |
| 25 mm | 2 sleeves of 25 mm |
Note: This model is optimized for use with 16 mm to 19 mm diameter guard pipes.
Installation Instructions
Tool Required: 3 mm Allen Key (included)
- Use the 3 mm Allen key to loosen all screws and separate the two halves of the Base Mount.
- Refer to the sleeve chart and insert the appropriate rubber sleeves into both halves.
- Clap the Base Mount over the engine or tank guard pipe.
- Ensure that inner alignment tabs are on the same side.
- Reinsert and tighten all screws using the Allen key provided.
⚠️ Recommendation: Though designed for DIY use, professional installation is advised if you face difficulty.
Compatibility
Designed for Guard Sizes: 16 mm – 19 mm
Motorcycle Fitment:
Royal Enfield
- Himalayan (2015–2020)
- Himalayan BS6 (2020+)
