Rynox Cypher GT 2 Jacket (Grey)

Rynox Cypher GT 2 Jacket (Grey)

Impact Protection

• Shoulder: CERROS Zero-G Level 2 shoulder protectors, certified to CE standard EN 1621-1:2012
• Elbow: CERROS Zero-G Level 2 elbow protectors, certified to CE standard EN 1621-1:2012
• Back: CERROS Zero-G Level 2 back protector, certified to CE standard EN 1621-2:2014
• Chest: Chest protector-ready pockets

Abrasion Resistance

• Heavy-Duty Outer Shell: 600D PU-coated polyester shell for abrasion resistance
• Ventilated Shell: Heavy-duty woven mesh made from a polyester-nylon blend

Fit & Comfort

• Fit: Everyday comfort fit
• Cinchless Design: No arm or waist cinches for a cleaner silhouette
• Low-rise Collar: Specifically tailored collar design for maximum full-day comfort
• Cushioned Comfort: Soft Neoprene trims on collar and cuffs prevent chafing of skin
• Glove-Friendly Pockets: 2 large side pockets + 1 ID pocket come with glove-friendly zipper pull tabs

Increased Visibility

• Increased Low-Light Visibility: Dark retro-reflective panels on arms and back

Modulayer - Performance Layering System

With our MODULAYER system, you can choose to wear just the riding jacket or all the layers together, as per your specific usage pattern and the weather forecast of the day. 

Every layer in the MODULAYER system is purpose-built for motorcycling and is intended to be worn along with a protective riding jacket.

What's Included

• Primary jacket shell (1 unit) 
• Shoulder protectors (2 units) 
• Elbow protectors (2 units) 
• Back protector (1 unit) 

Wash & Care

Step 1 - Prep

• Remove all impact protectors
• Undo all zippers, velcro and buckles
• Shake off any surface dirt
• Use a soft brush if required

Step 2 - Which Detergent?

• Use (in order of preference)
• Purpose-made tech-wash
• Neutral unscented liquid detergent
• Woollen liquid detergent
• Baby shampoo

Completely Avoid

• Any type of granular powder detergent
• Any type of heavily scented liquid detergent

Step 3 - Soak

• Dissolve 1 cap of detergent per garment in a bucket of lukewarm water
• Soak for at least 30 minutes
• Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it's too hot for your gear.

Step 4 - Wash and Rinse

• Agitate and scrub with your hands
• Focus on spots with grease and grime
• Repeat until clean
• Rinse multiple times until free of detergent
• Avoid using hard, abrasive brushes. Use a soft brush if required

Step 5 - Let Dry and Store

• Put on a hanger and let it dry in a cool, ventilated, shaded area
• Once dry, store in a cool, ventilated, moisture-free place, away from house dust
• Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.

Size Chart