Viaterra Boreal Mid-layer Warm Jacket - Petrol

Viaterra Boreal Mid-layer Warm Jacket - Petrol

The Boreal is ViaTerra's first midlayer which combines the casual aesthetic with technical design. Made from a special 3-layer fabric, it protects from wind, cold as well as slight drizzles. Perfect for the trip to Ladakh.

What's included with the product?

1 Boreal Midlayer Jacket

How to measure the size of the jacket

Things to keep in mind to ensure the measurements are taken correctly -

It will be helpful to have a family member or a friend take the measurements - Please use flexible tape only, like a tailor’s tape - All the measurements must be in the same units, whether cm or inches

STEP 1 -

Measure using a tailor's tape There are two key measurements that you need to take into consideration for figuring out your jacket size.

A) Chest - Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.

B) Waist - Measure the waist circumference over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 -

Find your jacket size by checking measurements against the size chart provided - If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size. - If the two measurements are on the borderline between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference. Remember, each brand has its size charts, so do check the chart before you select the size.

Fitment

If you wish to wear the Boreal inside a riding jacket, please ensure there is adequate space & is not tight fitting.

You can check this by wearing the Boreal with the riding jacket and stretching your arms out in the riding position to confirm there is no noticeable pulling at the shoulders and the torso area.

Specifications

Special 3 layer Polyester fabric

YKK reverse zippers

Weight ~350 gms

Care & Storage

CLEAN & CARE:

For dirt and stains, wipe clean with a damp cloth and lukewarm water (DO NOT USE HOT WATER) DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. Do not place your jacket near, or come in contact with a direct heat source Dry the jacket on a hanger away from direct sunlight where there is good ventilation. Zippers need to be cleaned and lubricated regularly - you can use Vaseline or candle wax.

STORAGE:

Make sure your jacket is completely dry before you store it on a hanger. If stored wet or in a non-ventilated area it allows mildew to grow on the fabric causing discoloration and damage

Size Chart