Viaterra Roost V2 – Offroad Motorcycle Gloves – Grey

Viaterra Roost V2 – Offroad Motorcycle Gloves – Grey

The new Roost v2 gloves build on the feedback received for the earlier version and continue to focus on the needs of the off-road trail rider – Comfort, grip, feedback, breathability, and protection. Lightweight and breathable, they offer exceptional dexterity and tactile feedback. Try them once, and they’ll likely become your go-to choice for everyday riding!

Designed to meet the critical needs of off-road riding, these gloves enhance grip and control feedback while providing best-in-class protection. The back is made from perforated stretch textile material, and the palm features perforated microfiber Kaitai microfiber suede for improved dexterity and comfort. The knuckles are equipped with Sas-Tec™ CE Level 2-rated viscoelastic armor, and the palms include SuperFabric™ EVA reinforced panels. Additionally, the palm and control fingers have silicone accents for better grip, and the index fingertips are touch-screen sensitive.

what’s included with the product

• 1 Pair of Roost v2 Offroad Motorcycle Riding Gloves

Product Specifications

The gloves are constructed with breathable 4-way stretch textile material on the back of the hand and perforated Kaitai microfiber suede on the palm side, enhancing dexterity and comfort. Sas-Tec™ CE Level 2-rated Viscoelastic armor protects the knuckles, while the palms feature SuperFabric™ EVA reinforced panels. Silicone accents on the index and middle fingers, as well as the palm, improve grip. Additionally, the index fingertips on both hands are touch screen sensitive.

How to measure glove size?

STEP 1 – Measure your hand using a tailor’s tape measure
There are two key measurements that you need to take into consideration for figuring out your glove size.
A) Circumference – Wrap the tape measure around your palm at its widest point and lightly close your hand before taking the measurement.
B) Length – Measure from the tip of the middle finger to the base of your palm at your wrist.

STEP 2 – Find your glove size by checking hand measurements against the chart provided
– If both the measurements do not fall in one particular size – use the larger of the two measures to choose the glove size.
– If the two measurements are on the borderline between two sizes, try both sizes and choose the one that offers a better fit.

How to check glove fitment?

STEP 1 – Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on from a fist several times, and verify if:
1. Adequate room for all fingers especially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right-hand sizes do vary.
Ensure that the fit on the first try is not so tight as to cause discomfort and/or restrict movement.

STEP 2 – Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed.

Things to remember

The Roost v2 gloves are specifically designed for off-road use and will not provide the same level of protection as our street gloves. Off-road riding demands more from gloves due to constant control modulation. While we have enhanced durability, these gloves may wear out faster than traditional leather gloves, depending on use. Made from textile material and Kaitai microfiber, they offer superior grip, feedback, and comfort but are more susceptible to wear and tear. This wear is dependent on individual use and is not covered under the warranty policy.

Off-road usage can make the gloves dirty, so we recommend cleaning them after each session if cleanliness is a concern. Fit and comfort are subjective and vary from person to person, so we suggest trying the gloves before purchasing. Additionally, avoid contact between the hard Velcro and the glove fabric which can cause fraying – this does not affect the performance.

Care & Storage

Materials needed:
Microfiber/ soft cloth
A small bowl or mixing cup
Absorbent towels
Soft-bristled brush
Diluted cleaning solution
Lukewarm water

How to clean & dry gloves?
1. Clean the gloves as soon as you can, after your off-road session. This will make removing any stains easier. Leaving the gloves un-clean will make removing any stains tougher.
2. In a small bowl or measuring cup, mix a portion of the diluted cleaning solution in lukewarm water.
3. Dampen a microfiber cloth with the mixture and gently wipe the stained areas. If there are stains that you are unable to remove using a damp cloth, use a soft-bristled brush soaked in a mild pH-neutral soap and rinse off using cold water. Please note that using a stiffer brush could lead to piling which will not be covered under warranty.
4. Clean the gloves starting at the wrist and working toward each fingertip. Be sure to clean well between each finger. Keep moving to a clean area of the cloth as the dirt is transferred.
5. Rinse the cloth often as the dirt is transferred. Turn the gloves over and repeat on the other side.
6. DO NOT USE HOT WATER
7. Do not use detergents, fabric stain removers, bleach, or any chemicals for cleaning.
8. Do not wash the gloves in a washing machine.
9. Dip-dry the gloves after cleaning in a ventilated area away from direct sunlight.
10. Do not wring the gloves.

How to store?
When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.
1. Make sure that your gloves are completely dry before you store them.
2. Place them in a breathable cotton bag to protect them from dust but with enough air circulation to prevent mildew from forming.
3. Store them in a cool, dry, well-ventilated area

Size	XS, S, M, L, XL, 2XL

Brand

Shipping is usually done in 2 working days after receiving order. If need express shipping contact our team at 8962258899. If you are making backorder or product is in pre-order state then it will be shipped when we get new stocks.

Once order is shipped and not received when delivery attempt is made, it will come back to us. In such case of RTO (Return to Origin), shipping cost of return and reshipping is to be born by Customer. Once order is shipped tracking details are shared on email and also can be checked in your website account. In any case of delay in delivery due to shipping service provider, we will not be liable. You need to contact shipping service provider.
Some Products are made on order, so may take time of 7-10 days.