DENALI D7 Auxiliary LED Lights – Lights Only – Set of 2

Part No. DNL.D7.050.2

Product Description

At over 15,000 lumens, the Denali D7 light kit is one of the brightest LED lights under 115 mm. A pair of D7s feature fourteen high-intensity 10 watt LEDs that are focused through a proprietary single piece optic that was specifically engineered to create a full bodied spot beam that can reach over 450 m at one lux. The robust heatsink and Active Thermal Management™ work together to keep this high powered lamp cool enough to maintain maximum light output when you need it most.

Still not convinced this light is bright enough? A pair of D7s will outshine fourteen D2 lights and produces more than twice the light output of Denali’s beastly D4 light kit.

The D7 kit uses a HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

The D7 housing is only 112mm round and 100mm deep, and uses cast-in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. All Denali housings are IP67 waterproof & submersible, making sure you’re ready for any adventure that comes your way!

Don’t be gouged by overpriced lights that don’t outperform the competition. The D7 provides industry leading performance and innovative features at a fair price.

Highlights

460m throw, 60m beam width
15330 raw lumens
Total load 140W, 10 amp

Required Accessories – Make sure you choose an appropriate wiring harness (see suggestions at the bottom of the page) to go along with these lights.

More Flexibility, Maximum Control

For 2022 we have expanded on our standard light kit to deliver a customizable package that allows you to choose the best harness and lighting control option for your vehicle on your budget! Select from the options above or click on the links below to learn more about each of our wiring and switching options.  Please be sure to add one of these options to your light pods to complete your DENALI lighting kit!

• Standard Powersports Harness  – Robust, inexpensive, low-profile waterproof switch – the best option for a basic single intensity install
• Standard Automotive Harness – Robust, added length, and a flush mount illuminated rocker switch for dash mounting
• Premium Powersports Harness – Overmolded wire, and a premium illuminated switch with handlebar mounting kit
• DataDim Module – Add this clever dimmer module to any of the above harnesses to enable your lights to change intensity in sync with your factory high beam switch!
• DialDim Lighting Controller – The top dog in LED lighting control allows you to independently turn on/off and dim two sets of lights from a single halo dimmer switch and unlocks heaps of bonus features like high/low sync, strobe with horn, flash with signal, cancel with signal, electronic fuse setting and even doubles as a battery voltage monitor!

And last but not least we also make a complete accessory manager (The CANsmart Controller) that has dozens of customizable settings for controlling LED lights but can also be used to power and control any electrical accessories from lights and horns to heated grips, dash cams and GPS units.

D7 Pod Features

• High-Intensity Series Cree LEDs outputting 7665 lumens per pod
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one pair of pods
• DataDim™ equipped light pods enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
• DrySeal™ Submersible Waterproof light housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won’t crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Interchangeable lenses available in Clear, Amber, and Selective Yellow

Product Specifications

Size: 112 mm square x 100 mm deep
Power Draw: 140 W, 10 amps
Beam Distance: 460 m
Beam Width: 60 m
Raw Lumens: 15330
LED: 10 Watt Cree XPL HI (14, 7 per lamp)

What’s in the box?

Denali 2.0 D7 LED Light x 1 pair
Mounting Instructions

Installation Instructions

Brand

Shipping is usually done in 24-48 Hours after receiving order. If need express shipping contact our team at 9300720789 / 7879720789. If you are making backorder or product is in pre-order state then it will be shipped when we get new stocks.

Once order is shipped and not received when delivery attempt is made, it will come back to us. In such case of RTO (Return to Origin), shipping cost of return and reshipping is to be born by Customer.
Some Products are made on order, so may take time of 7-10 days.