Easy Cruise for Royal Enfield Meteor – Prospec – ECZ 021-B
₹2,250.00
Or 3 interest free payments of ₹750.00 with
Enfield Meteor bikes. It will be a direct replacement of the existing bar end. To engage Cruz mode, one
needs to turn the knob inward (throttle opening direction). This action would apply a slight friction on the
accelerator tube. Once set on Cruz mode one can continue to increase or decrease or completely shut
down the accelerator as desired. To disengage the Cruz mode the knob to be turned outward (throttle
closing direction).
Please follow the instruction carefully to ensure the desired benefit of the Easy Cruz.
1. Loosen the Allen head screw and remove the bar end from the Handle Bar.
2. Place the Easy Cruz in place of the OE bar end as shown in the figure below.
SI. | DESCRIPTION | QTY. |
1 | Easy Cruz Body (PS ECZ 021) | 1 |
2 | Easy Cruz Knob (PS ECK 01) | 1 |
3 | Step Washer Small ( PH TH-014-03) | 1 |
The Easy Cruz is developed considering safe usability but it is the complete responsibility of the rider to be
aware of the operation and purpose for which it is intended.
Please note that the grub screw shown in the picture should not be over tightened. Otherwise, it will lead to
damage to the thread.
Note: Though the Easy Cruz retrofits are designed for DIY installation it is recommended you have them installed by
a technician if you face difficulty.
Related products
Cruise Control
RE Super Meteor 650
Cruise Control
Cruise Control
Cruise Control
RE Interceptor 650 / GT 650
Prospec Easy Cruz (Throttle Controller) for Interceptor 650- ECZ008-B – ECZ008L-B